How To

How To Make a Debris Hut Shelter

The debris hut is a shelter that can be made with a variety of materials and provides significant warmth. For these reasons the debris hut is a good type of shelter to fall back on.

To make a debris hut –

  • Build it by making a tripod with two short stakes and a long ridgepole or by placing one end of a long ridgepole on top of a sturdy base.
  • Secure the ridgepole (pole running the length of the shelter) using the tripod method or by anchoring it to a tree at about waist height.
  • Prop large sticks along both sides of the ridgepole to create a wedge-shaped ribbing effect. Ensure the ribbing is wide enough to accommodate your body and steep enough to shed moisture.
  • Place finer sticks and brush crosswise on the ribbing. These form a latticework that will keep the insulating material (grass, pine needles, leaves) from falling through the ribbing into the sleeping area.
  • Add light, dry, if possible, soft debris over the ribbing until the insulating material is at least 1 meter thick–the thicker the better.
  • Place a 30-centimeter layer of insulating material inside the shelter.
  • At the entrance, pile insulating material that you can drag to you once inside the shelter to close the entrance or build a door.
  • As a final step in constructing this shelter, add shingling material or branches on top of the debris layer to prevent the insulating material from blowing away in a storm.

How To Make a Debris Hut Shelter, 4.0 out of 5 based on 1 rating

Any views or opinions expressed in this article are those of the author and do not reflect those of OutdoorHub. Comments on this article reflect the sole opinions of their writers.