Our Take on the Springfield Armory EMP 9mm Pistol

The Springfield Armory EMP–what’s in a name?

Contrary to popular belief, the Springfield Armory EMP will not generate a burst of Electro-Magnetic Pulse radiation, thereby knocking out any still-operational Chevy Volts on the eastern seaboard.

Nor is it named after the Experience Music Project Museum in Seattle, originally conceived to recognize the mind-blowing music of Jimi Hendrix.

It’s not shipped from the Emporia Municipal Airport (EMP) in Lyon Country, Kansas.

Some think that the EMP was named in reference to the Earth Microbiome Project, whose mission is to identify and catalog all microbial life on planet earth. Including those elusive cooties.

And no, the original Springfield Armory EMP design was not sketched out on a cocktail napkin at New York’s swanky Eleven Madison Park Restaurant.

While closer to home, it’s not an homage to the Erma EMP-35 submachine gun manufactured by Germany from 1930 to 1938. While it’s a 9mm also, the Springfield Armory EMP has no full auto selector. Nor does it have a 32 round magazine like the EMP-35.

Give up?

It’s the Springfield Armory EMP – Enhanced Micro Pistol – chambered in 9mm or .40 S&W.

Springfield Armory EMP 9mm features

Like the Springfield Armory 1911 TRP we recently reviewed, the Springfield Armory EMP 9mm is loaded with custom features and extras. A dollar store handgun this is not. You will get what you pay for in feature set and quality of construction.

The Springfield Armory Enhanced Micro Pistol was designed from the ground up to function reliably with the shorter cartridge size of the 9mm and .40 S&W rounds. With a wide variety of 9mm ammo we tested (outlined in more detail below) we did not experience any function problems from the first round on. The Enhanced Micro Pistol demonstrated no ammunition preference in terms of reliability. Other small 9mm pistols have been known to require certain projectile weights or weight / power combinations in order to function, so we found the ammunition indifference to be a big plus with the Springfield Armory EMP.

Like the Springfield Armory TRP, the Springfield Armory EMP, or Enhanced Micro Pistol, features fully ambidextrous safety levers. Both are extended, but the right hand lever is ever-so-slightly narrower. Most likely to favor the majority of shooters who are right-handed. In our testing, we did not find the right hand lever to get in the way of holsters, nor did it hang up on clothing when carrying concealed.

The sights are steel and mounted front and back via dovetail cuts, so they are easily adjustable for windage. No adjustment was necessary on our test gun – with all ammo tested, windage was dead on comparing point of aim and point of impact. Like the TRP, the sights are manufactured by Springfield Armory, but are supplied with Trijicon tritium inserts. The ramped rear sight has two tritium dots while the front sight features a single tritium dot.

The magazine release button is checkered, and due to the reduced grip size, we found it easy to activate without changing our firing grip. Magazines drop freely from the EMP to facilitate rapid mag changes.

The trigger is aluminum and features three hole cutouts for a bit of weight reduction, but mainly to add to its sexy appearance. There is an adjustable over-travel screw. The EMP came from the factory with no detectable over-travel, but if you like a little, feel free to adjust.

The frame and slide are well-rounded and optimized for carry. The back strap is checkered, while the front strap is smooth. The EMP features and extended beavertail and the grip safety offers a memory bump that makes safety disengagement positive. During our testing, we had no issues getting reliable and consistent grip safety disengagement, regardless of grip style.

Springfield Armory does a swell job of providing lots of goodies in the box. You’ll get the pistol of course, You’ll also get 3 magazines manufactured by Mec-Gar for Springfield Armory. These are embossed with a large EMP logo to help you keep them straight from any other 1911 magazines you may have lying around. You’ll also find a kydex paddle-style belt holster and dual magazine carrier. And of course a cleaning brush, instructions, a coupon sheet for lot’s of discounted accessories like extra factory magazines, a couple of keys for the integral lock, and allen wrenches for sight adjustment and grip removal. All of this comes packaged in a custom foam-lined and lockable hard plastic case.

You look marvelous darling!

One of the things that drew us to the Springfield EMP 9mm for a full evaluation is it’s appearance. Yes, we’re that shallow. We’ll test just about any gun if it looks hot at the range.

The grips are a thing of beauty. We’ve always been suckers for nice wooden grips. The Springfield Armory EMP features Cocobolo hardwood grips. As everyone know, Cocobolo is a tropical hardwood derived from the heart of the dalbergia retusa tree. In fact, if you hold the grips up to your ear, you can hear the ocean and smell pina coladas. More importantly, Cocobolo is not only beautiful and sexy, it’s hard, durable and loaded with oils. The oils serve to protect the wood from water, sweat, cleaning solvents, and other abuses. The grips are checkered, except for smooth diamond-shaped areas around the mounting screws. There is also a really sooper dooper Springfield Armory logo embossed into each grip. Did I mention that these grips look marvelous?

The frame is constructed from forged aluminum alloy with a black-anodized hard-coat finish. With the 1,000 or so rounds we’ve shot and plenty of daily carry, we’ve not had any issues with scratching or chips.

The slide is forged stainless steel. It’s got a satin finish. In average Joe’s English, satin finish translates to not shiny.  We observed at least two practical benefits from the satin stainless finish. First, the top of the slide does not produce glare in sunny conditions. The front and rear sights are a black matte finish, so visibility in bright conditions is great. A second benefit is that the satin finish hides things that might detract from the EMP’s marvelous appearance. Fingerprints don’t show, holster wear will be nearly invisible, and micro-abuses will be subdued in appearance.

The aluminum trigger finish matches that of the slide, so it makes for a nice visual complement.

What can we say? The EMP looks marvelous!

Note: The Springfield Armory EMP is also available with the same frame and slide finish, but with grey-toned G10 grips for extra durability. The G10 model is also a fantastic looking gun – just a tad more tactical in appearance.

9+1 capacity

There are at least two benefits to having a 1911 platform gun chambered in 9mm. First, you can make it smaller, as evidenced by the Springfield Armory EMP. The smaller diameter and shorter overall length of the 9mm cartridge allows for a grip that is both shorter front to back and narrower side to side. The second bennie is that you can fit more bullets into the same amount of space, all other things being equal.

One thing to note, if you’re topping off the full 9 in the mag plus 1 in the chamber load, don’t be a sissy when you seat the magazine. Inserting a magazine full with 9 rounds into the EMP with a loaded chamber requires a vigorous spank. This is a good habit with any gun as many undesirable malfunctions are caused by improperly seated magazines. If your smack a full magazine into an EMP, it will seat with a satisfying and positive click, so no worries there. Just don’t coddle it. It’s a gun after all and designed to be handled with authority and confidence.

The EMP’s three included magazines are manufactured in Italy by Mec-Gar especially of the Springfield Armory EMP. One side is stamped accordingly while the other features a large EMP logo. One minor frustration with the EMP magazines is the lack of witnessing holes to see how many rounds are loaded in the magazine. Even one hole towards the bottom that allowed a quick visual confirmation of full magazine status would be nice to have.

Shooting the Springfield Armory EMP 9mm pistol

We headed to the range on several occasions to run the EMP through its paces. The velocity testing was done after two previous range trips where we had put about 200 rounds through the Springfield Armory EMP. As a side note, no cleaning has been done to date. Just because we’re curious to see how long it will go without getting finicky.

Here are the results:

We really like the handling of the Springfield Armory EMP chambered in 9mm. While we did a lot of general target shooting and good old-fashioned plinking, what was most enlightening was running through some simple practice drills. We shot the Dot Torture drill a number of times to get a more subjective indication of how the Springfield Armory EMP feels.

If you’re not already familiar, the Dot Torture drill is a series of 50 shots at small targets placed 3-5 yards downrange. The sequence of shooting requires the shooter to fire two-handed, strong hand only, weak hand only, perform target transitions with single and double-tap shots, and perform reloads between targets. In other words, it’s kind of like a complete practice session in a box. Shoot a Dot Torture drill and you’ll spend a bit of time on a number of different shooting fundamentals. You’ll also get a good feel of how a handgun “feels” with several different shooting scenarios. We found it easy to complete the Dot Torture drill with the EMP.

Here’s why.

The 9mm chambering helps a lot, but what really makes the EMP a pussycat to shoot is the ability to get a full and comfortable grip. It’s a compact pistol, but none of our shooters had any trouble getting all fingers placed firmly on the grip. The result is a pistol that is very gentle to shoot and this made a noticeable difference with the Dot Torture double tap shot strings. It was easy to place multiple rounds virtually on top of each other at high-speed and with relative ease.

The sight picture is excellent. The sharp cuts of the rear notch and front sight make for a crisp and fast to acquire sight picture. The tritium filled tubes are outlined in either white or metal (hard to tell) and stand out fine in daylight.

Just as a side observation, the beavertail grip safety allows for high hand placement. We found that one can shoot the EMP with the strong hand thumb either riding on top of the frame safety lever or below. If you choose to place your thumb below, you won’t risk advertently bumping the safety upwards. We’ve seen this on some 1911’s, but the contour of the Springfield Armory EMP seems to prevent this.

The checkering and grip surfaces are designed with carry in mind. While the Springfield Armory 1911 TRP we recently reviewed was clearly designed for tactical use with sharp checkering and heavily textured G10 grip panels, the Springfield Armory EMP achieves more of a balance between comfort and grip. The back of the mainspring housing is checkered while the front of the grip is smooth. The Cocobolo wood grips have mildly aggressive checkering, so you can carry the EMP using an inside the waistband holster without rubbing any nearby love handles raw. Even with the toned-down textures, we had no problem keeping a firm and stable grip through fast strings of fire.

How to field strip and clean a Springfield Armory EMP 9mm pistol

With a couple of minor exceptions, field stripping a Springfield is like field stripping any other 1911 design pistol. The Springfield Armory EMP uses a dual spring, captive mechanism which adds a bit of a trick to fully field stripping the pistol.  To relieve spring tension and make things a lot easier on the fingers, Springfield Armory includes a plastic takedown assist bushing piece that greatly facilitates ease of takedown. You can remove the slide with or without the takedown assist piece, but it will be hard on the fingers to remove the spring assembly and barrel from the slide without it.

Here’s how you do it.

There you have it!

To put things back together, simply reverse the order. When you’ve got the slide back on and slide stop lever replaced, snap the takedown assist piece off and store it in a safe place for next time.

Closing arguments

Here’s the quick summary.

If we could wave a magic feature enhancement wand, there are only two things we would change on the Springfield Armory EMP 9mm. First, it would be great to simplify field stripping. It’s not hard when you use the included takedown assist bushing, but chances are that thing is going to get lost at some point. Is this a big deal? Not really, as the EMP is not a finicky gun. We didn’t clean it at all until it had about 1,000 rounds through it – and we had no problems whatsoever with function. So it’s not a high maintenance gun that will have to be cleaned after every range outing. Second, we would love to have one or more holes in the magazines to easily check round count. The magazines are well made and solid as a rock, but you can’t easily verify that they are filled to maximum capacity.

The form factor is a great tradeoff between size and self-defense capacity. Overall size is smaller than a compact Glock 19, but it still provides 9+1 rounds of 9mm. It’s thin, well-rounded where it needs to be, and therefore exceptionally easy to carry. We used it a lot with various inside the waistband holsters and it virtually disappears.

Where the Springfield Armory EMP 9mm shines is with its handling. Simply put, it’s a joy to shoot. The combination of smooth grip panel checkering, backstrap checkering, and a smooth front strap provides for a firm grip, but without sacrifice of concealed carry comfort with inside the waistband holsters. The trigger is fantastic. Adjustable for over travel and crisp, it’s easy to hit things with the EMP. The ambidextrous safety levers are crisp and easy to reach. While we wouldn’t classify the EMP as a heavy pistol, it does a great job of soaking up recoil from full powered 9mm self-defense loads. Clearly the dual spring design has a lot to do with that, as does the near perfect contour of the frame.

Tom McHale

Tom is the primary author of the Insanely Practical Guides series of how-to books. He believes that shooting can be safe and fun, and works hard to make the shooting world easy to understand. If you want to learn about the world of guns, shooting and the American way, check out some of his books. Have a laugh or two. Life is too short for boring "how to" books. You can find print and ebook versions at Amazon. For more information, check out InsanelyPracticalGuides.com Feel free to visit Tom at his website, MyGunCulture.com. It's a half-cocked but right on target look at the world of shooting and all things related. If you want to learn with a laugh about guns, shooting products, personal defense, competition, industry news and the occasional Second Amendment issue, visit him there.