Henry Steps Up, Scores Huge With Side Gate Lever Action

   08.26.19

Henry Steps Up, Scores Huge With Side Gate Lever Action

Henry Repeating Arms has introduced yet another new lever gun to their already long list of quality firearms. New for 2019 is the Henry side gate lever action rifle. The Henry side gate comes in three classic calibers, 30-30, 38-55 and 35 Remington. All three of these calibers are on the shelves now with a MSRP of $1.045, however the rifle can be found at your local retailer in the $800 to $900 range.

What makes this new offering from Henry so unique is that side gate loading is now standard just like the original Henrys from the 1860s. But the real twist is that the design of this Henry lever gun allows for the best of both worlds, side gate loading and the removable tube magazine loading that Henry has long been known for.

Henry says it best in their when describing the new side gate:  The hardened brass receiver is as reliable as it is handsome with the same yield and tensile strength as steel. The brass accents continue through the rifle with the butt plate and barrel band. The American walnut furniture is set off by intricate, deep checkering that will ensure a firm purchase on the stocks. A semi-buckhorn rear and ivory bead front sight accompanies a 20″ round blued steel barrel to deliver the accuracy you’ve come to expect from a Henry.

Side Gate Lever Action
Polished brass receiver

The specifications of the Henry Side Gate are as follows. Except for the twist rate, all specs are shared among the three currently offered chamberings:

  • Barrel Length: 20 inches
  • Barrel Type: Round Blued Steel
  • Rate of Twist: 1:16
  • Overall Length: 38.3 inches
  • Weight: 7.5 lbs.
  • Magazine Capacity: 5 rounds (in all current chamberings)
  • Receiver Finish: Polished Brass
  • Rear Sight: Fully Adjustable Semi-Buckhorn w/ Diamond Insert
  • Front Sight: Ramp with 0.062″ Ivory Bead
  • Receiver Scopeability: Drilled and Tapped
  • Scope Mount Type: Weaver 63B
  • Stock Material: American Walnut
  • Buttplate: Brass
  • Length of Pull: 14 inches
  • Safety: Transfer Bar
  • Best Uses: Target/Hunting/Large Game/Deer, Elk, Black Bear
  • Extras: Regular Lever. Swivel Studs
Side Gate Lever Action
Laser cut checkering.

Recently I was able to get my hands on the Henry side gate in 35 Remington. Since many reading this a probably not familiar with the 35 Remington cartridge it is worth diverting here to speak of its history. This Remington designed cartridge been around since 1906 and is most popular in a 200 grain bullet although other weight grain loads are currently available, primarily 150 and 220 grain by various ammo companies. Remington reportedly helped promote the advantage in power that the .35 Remington had over the .30-30 via a series of advertising campaigns in the early 1900s. In one of their advertisements Remington publicized the ability of the cartridge to penetrate a 5/16″ steel plate, which the .30-30 Winchester could not do.

Side Loading Lever Action
The Henry Side Gate comes with front and rear sling studs

Based on the Henry Big Boy platform the side gate receiver has a highly polished brass, butt plate, and barrel band with sling attachments fore and aft. A buckhorn rear sight with white diamond insert and a front ivory bead sight allows for easy sighting in low light. Stock is American Walnut with laser cut checkering on the forearm and pistol grip.

Side Gate Loading Lever Action
Notice the Buckhorn rear sight with diamond front sight, drilled & tapped receiver

As with other Henry lever guns I found the new side gate run flawlessly. I did note that the shooter needs to assertively work the lever to eject a spent casing once fired. The 35 Remington is a bit of a thumper in the recoil department and would be good medicine for medium to large big game in the 200 yard range. Accuracy was more than acceptable as I found after firing five shots at 50 yards from a supported position with a spread of 1.5 inches using Hornady’s 200 grain LEVERevolution, generously provided by Lucky Gunner. I had no problem hitting steel targets offhand out to 200 yards. As mentioned earlier, the rear buckhorn sight with white diamond inset coupled with front ivory bead make sighting on a target quick and easy.

Side Gate Loading Lever Action
Five shot group from 50 yards

By adding the side gate feature Henry has brought back the nostalgia of an old west lever gun. Add to that the available classic cartridges (30-30, 38-55, 35 Remington), along with Henry quality and lifetime guarantee, it’s just hard to beat. Take a look at Henryusa.com.

Side Loading Lever Action
Henry Model HO24-35 in 35 Remington.
Avatar Author ID 645 - 982184333

Terry Nelson is currently a writer for OutdoorHub who has chosen not to write a short bio at this time.

Read More